Public:ARHUDFM Features Summary: Difference between revisions
| Line 88: | Line 88: | ||
===Power Capacity and Active Cooling System=== | ===Power Capacity and Active Cooling System=== | ||
*With the ARHUDFM mask, we have thought of this and the non-removable battery capacity is | *With the ARHUDFM mask, we have thought of this and the non-removable battery capacity is 12-elements 16.8V battery 16500mAh / 277wh (LiMgCoAl 26650 3.7V 5500mah), which is equivalent to a lifetime of over 7 hours. And in special cases, when you want to increase the continuous life of the device, the user can connect the power bank (4x12, max 48pcs LiMgCoAl 26650 3.7V 5500mah, ~ 1,065.6wh, 9.9 lbs / 4.6 kg) from the backpack without removing it, but only by reaching into the pocket and inserting the cable into the connector on the back of the mask. | ||
*Another problem is the cooling of electronic components inside a sealed case, especially the processor (CPU), the graphics processing unit (HPU), the RAM chips, and the battery. Air cooling breaks the seal and moisture and dust can enter. Air cooling is not possible with sealed designs. Liquid cooling is not possible for wearable compact devices. Using aluminum for the outer casing of a wearable device is ineffective because the casing will be heated by direct sunlight to the point where the processor protection kicks in and the processor starts to decelerate until it shuts down completely. We solve the problem with a hybrid circuit consisting of a compact active cooler and heatsink inside and an efficient heatsink outside, connected in a closed loop with digital control. | *Another problem is the cooling of electronic components inside a sealed case, especially the processor (CPU), the graphics processing unit (HPU), the RAM chips, and the battery. Air cooling breaks the seal and moisture and dust can enter. Air cooling is not possible with sealed designs. Liquid cooling is not possible for wearable compact devices. Using aluminum for the outer casing of a wearable device is ineffective because the casing will be heated by direct sunlight to the point where the processor protection kicks in and the processor starts to decelerate until it shuts down completely. We solve the problem with a hybrid circuit consisting of a compact active cooler and heatsink inside and an efficient heatsink outside, connected in a closed loop with digital control. | ||
[[File:UI ex 1.1@2x.png|thumb|GUI example, ''Click on the picture to zoom in'']] | [[File:UI ex 1.1@2x.png|thumb|GUI example, ''Click on the picture to zoom in'']] | ||